¡Feliz año nuevo para todos, que se sumen las bendiciones y sonrisas en nuestras vidas!
Hoy amigos, para los amantes del trabajo con papel reciclado, les quiero compartir a través de un tutorial sencillo, como podemos obtener pequeños y útiles joyeros personalizados utilizando la técnica de papel maché¡Comencemos !


.Objeto de base circular: Vaso
.Papel maleable
.Cartón
.Lapicero
.Tijera
.Acuarelas
.Papel plateado
.Algodón
.Pegamento

1- Dibujamos dos circunferencias en un cartón de 5 centímetros de diámetro, con ayuda de un lapicero y el fondo de un objeto circular: vaso. Estas dimensiones pueden variar de acuerdo al tamaño del joyero deseado.
2-Recortamos con ayuda de una tijera, siguiendo la guía marcada.

3- Cortamos dos listones de cartulina de 3 centímetros de ancho y 15 centímetros de largo aproximadamente.
4- Adherimos con pegamento los listones a las circunferencias de la siguiente forma: uno, en la circunferencia 1, alrededor del borde , esta constituirá la parte inferior del joyero; el otro listón lo adherimos sobre la superficie de la circunferencia dos, 4 milímetros antes de llegar a su borde conformando un círculo.
5- Ya teniendo la estructura superior e inferior creada de nuestro joyero, vamos a darle tres capas de empapelado a cada una, con pega elaborada de harina y tiras de papel blanco.A la estructura superior, le realizamos además relieve, con pequeños papeles estrujados conformando el diseño deseado.Yo resalté los pétalos de una flor en uno de los joyeros, y en el otro, los cachetes de Santa Claus. Daremos una capa más de empapelado a la parte superior.Dejamos secar 8 horas a ambas estructuras.

Hasta aquí hemos logrado la estructura de los pequeños joyeros, ahora pasaremos a personalizarlas.
1- Con pincel y acuarelas , damos pinceladas en toda su superficie con tonalidades de nuestro gusto, violeta, verde, naranja, rojo, negro fueron algunas de las que utilicé para crear la flor y el rostro de Santa Claus.
2- Adherimos con pegamento algodón sobre la superficie, logrando aparentar en uno , un plumaje delicado, y en el otro, la copiosa barba de Santa Claus.
3- Adherimos piedras brillantes con pegamento en la superficie, y le esparcimos brillos adherentes.
4- Cortamos una circunferencia de papel plateado de 5 centímetros de diámetro, y la colocamos en la región interior de la estructura inferior del joyero.

Amigos, me encantó el resultado de estos joyeros , lucen hermosos decorando mi cómoda mientras resguardan: aretes, anillos, cadenas y argollas.
Espero que a ustedes también les haya gustado y motivado a su futura confección, tanto para decorar, cómo para utilizarlos como soporte de obsequios diminutos, pero con un gran valor sentimental, como los deslumbrantes anillos de compromiso.
Vibras positivas a todos, y prósperos días venideros.
Fotografías propias.
Happy New Year to all, may the blessings and smiles be added in our lives!
Today friends, for those who love working with recycled paper, I want to share with you through a simple tutorial, how we can get small and useful personalized jewelry boxes using the papier mache technique Let's get started!


.Circular base object: Glass
.Malleable paper
.Cardboard
.Pen holder
.Scissor
.Watercolors
.Silver paper
.Cotton
.Glue
These small jewelry boxes will have the structure of a small circular box, which we will create initially, and then customize it to our own style.

1- We draw two circumferences on a cardboard of 5 centimeters in diameter, with the help of a pencil and the bottom of a circular object:glass.These dimensions may vary according to the size of the desired jewelry box.
2- Cut with the help of a scissors, following the marked guide.

3- We cut two cardboard strips about 3 centimeters wide and 15 centimeters long.
4- We glue the slats to the circumferences as follows: one, in circumference 1, around the edge, this will constitute the bottom of the jewelry box; the other slat we adhere on the surface of the circumference two, 4 millimeters before reaching its edge forming a circle.
5- Already having the upper and lower structure created of our jewelry box, we are going to give three layers of wallpaper to each one, with glue made of flour and strips of white paper.To the upper structure, we also make relief, with small squeezed papers forming the desired design.I highlighted the petals of a flower in one of the jewelry boxes, and in the other, the cheeks of Santa Claus. We will give one more layer of wallpaper to the top.We let both structures dry for 8 hours.

So far we have achieved the structure of the small jewelry boxes, now we will move on to personalizing them.
1- With brush and watercolors, we give brushstrokes on its entire surface with shades of our liking, violet, green, orange, red, black were some of those that I used to create the flower and the face of Santa Claus.
2- We adhered with cotton glue on the surface, managing to appear in one, a delicate plumage, and in the other, the copious beard of Santa Claus.
3- We adhere shiny stones with glue on the surface, and we spread adherent glitters on it.
4- We cut a silver paper circumference of 5 centimeters in diameter, and place it in the inner region of the lower structure of the jewelry box.

Friends, I loved the result of these jewelry boxes, they look beautiful decorating my dresser while sheltering: earrings, rings, chains and hoops.
I hope you also liked it and motivated your future preparation, both to decorate, and to use them as a support for tiny gifts, but with a great sentimental value, such as dazzling engagement rings.
Positive vibes to all, and happy days ahead.
Own photographs.
Such lovely and creative jewelry boxes. The shapes they take is also nice. Well done
selected by @stevenson7
Hola @marydeluz, que lindos joyeros, el de la flor es mi favorito, me encanta la idea para reutilizar, las botellas de plástico y el cartón.
Feliz fin de semana!
Saludos,¡muchas gracias!Feliz día.💁☀️
que hermosos y originales, bien elaborados!
How beautiful and original, well made!